To Next Page

To Previous Page

HP TFT5110R User Guide 4-1

HP CONFIDENTIAL

Writer: Amy L. Laffitte File Name: e-ch4 Care and Maintenace

Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 9:40 AM

Care and Maintenace

Maintenance and Shipping Guidelines

This section discusses maintenance and shipping guidelines for the TFT5110R.

To protect the unit from overheating and other types of damage:

• Use only a power source and connection appropriate for this unit, as indicated on

the marking label and back plate.

• If an extension cord or power strip is used, be sure that the cord or strip is rated

for the product. Also, be sure that the total ampere ratings of all products

plugged into the extension cord or power strip do not exceed 80 percent of the

extension cord or strip ampere ratings limit.

• Do not overload an electrical outlet, power strip, or convenience receptacle. The

overall system load must not exceed 80 percent of the branch circuit rating. If

power strips are used, the load should not exceed 80 percent of the power strip

input rating.

• Install the unit near an outlet that you can reach easily. Disconnect the product by

grasping the plug firmly and pulling it from the outlet. Never disconnect it by

pulling the cord.

• Unplug the unit from the wall outlet before cleaning. Do not use liquid cleaners

or aerosol cleaners.

• Do not block or cover the slots and openings in the monitor. The slots and

openings are provided for ventilation. Never push objects of any kind into these

slots or openings.

HP TFT5110R User Manual

Other manuals for HP TFT5110R