Table 5-2 Computer Setup—Main (continued)
1st Drive
2nd Drive
For each, allows you to:
●
Port Configuration (disable/enable)
●
(view only)
◦
Capacity (Size - HDD only)
◦
Transfer Mode
●
Smart Support - run HDD self-test for selected channel:
◦
SMART Status Check
◦
SMART Short Self-Test
◦
SMART Extended Self-Test
System Information (view only)
●
Installed Memory
●
Memory Bank 1
●
Memory Bank 2
●
BIOS Revision
●
Core Version
●
Product Number
●
Model Number
●
Serial Number (press Enter to change)
●
Asset Tag (press Enter to change)
Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
WARNING! Setting items on this menu to incorrect values may cause your system to malfunction.
Table 5-3 Computer Setup—Advanced
Option Description
CPU Type (view only)
CPU Speed (view only)
Cache RAM (view only)
SATA1 Controller Allows you to disable/enable the SATA Controller.
52 Chapter 5 Computer Setup (F10) Utility
To Next Page
Loading...
