7. Press the Connect button on the bottom of the keyboard (3) for five seconds. The blue activity
LED from the wireless receiver illuminates when the synchronization command has been
received and turns off when synchronization is complete.
Figure 2-34 Synchronizing the Wireless Keyboard and Mouse
8. Close the rear port access door.
NOTE: If the procedure does not work, remove and then re-insert the wireless keyboard and mouse
receiver from the back of the computer and then synchronize the keyboard and mouse again.
Connecting the Computer to a Cable TV Source
NOTE: A TV tuner is included with select models only.
To connect the computer to a cable TV source:
1. Turn off power to the computer and the set-top box.
2. Open the rear port access door on the computer.
3. Connect a coaxial cable between the coaxial connector on the rear of the computer (1) and the
set-top box (2).
ENWW Connecting the Computer to a Cable TV Source 31
To Next Page
Loading...
Need help?
General
