HP TouchSmart 9300

4. When you use the remote control, point it at the front of the computer, not at the set-top box.
Figure 2-36 Using the Remote Control
Connecting a Second Display
The DisplayPort on the rear of the computer allows you to connect a second display, such as a
monitor or TV, to the computer.
If you are adding a second display that has a DisplayPort, then no DisplayPort video adapter is
required. If you are adding a second display that does not have a DisplayPort, you can purchase a
DisplayPort video adaptor from HP for your configuration.
DisplayPort adapters and video cables are purchased separately. HP offers the following adapters:
●
DisplayPort to VGA adapter
●
DisplayPort to DVI adapter
●
DisplayPort to HDMI adapter
To connect a second display:
1. Turn off power to the computer and the second display that you are connecting to the computer.
2. Open the rear port access door on the computer.
ENWW Connecting a Second Display 33