To Next Page

To Previous Page

* *

************************************************************************

Creation Date : Jan 9 2011

CPU Type : ARM926

CPU L1 Cache : 32KB

CPU Clock Speed : 333MHz

Memory Type : DDR2 SDRAM

Memory Size : 128MB

Flash Size : 128MB

CPLD Version : 001

PCB Version : Ver.B

Mac Address : 000ef2001910

Press Ctrl-B to enter Extended Boot menu...1

The last line asks whether you want to enter the Boot ROM menu. The system waits for one second for

your response.

NOTE:

 The system has two startup modes: normal startup and fast startup. The normal startup mode requires a

little longer time than the fast startup mode because of more self-test operations.

 By default, the system starts up in fast mode and the waiting time here is one second. If you set the

startup mode to normal, the waiting time is five seconds. The following section describes the settin

the startup mode.

 If you press Ctrl + B within one second, the Boot ROM menu is displayed.

BOOT MENU

1. Download application file to flash

2. Select application file to boot

3. Display all files in flash

4. Delete file from flash

5. Modify BootRom password

6. Enter BootRom upgrade menu

7. Skip current system configuration

8. Set BootRom password recovery

9. Set switch startup mode

0. Reboot

Enter your choice(0-9):

Table 16 Description on the fields

Item Descri

tion

1. Download application file to flash Download the boot file to the flash memory

2. Select application file to boot Select the boot file to boot

3. Display all files in flash Display all files in the flash memory

Questions and Answers:

Need help?

Do you have a question about the HP V1910 Series and is the answer not in the manual?

HP V1910 Series Specifications

General