HP V1910 Series - Configuration terminal problems; No terminal display; Garbled terminal display

37
Configuration terminal problems
If the configuration environment setup is correct, the configuration terminal displays booting information
when the switch is powered on. If the setup is incorrect, the configuration terminal would display nothing
or garbled text.
No terminal display
If the configuration terminal displays nothing when the switch is powered on, check that:
 The power supply is normal.
 The console cable is properly connected.
 The console cable has no problem and the terminal settings are correct.
Garbled terminal display
If terminal display is garbled, check that the following settings are configured for the terminal, for
example, HyperTerminal:
 Baud rate—38,400
 Data bits—8
 Parity—none
 Stop bits—1
 Flow control—none
 Emulation—VT100