1 Setting Up and Using Your PC
Unpacking Your PC
2 English
1
Setting Up and Using
Unpacking Your PC
WARNING If you have any doubt that you can lift the PC or display safely, do not
try to move it without help.
1 When you receive your PC, unpack all the components.
2 Place the PC on a sturdy desk near to easily accessible power outlets,
with enough space for the keyboard, mouse, and any other
accessories.
3 Position the PC so that its rear connectors are easily accessible.
4 Place the display on top of the computer. If you have a large display,
place it next to the computer. Refer to the display’s manual for
information about the display.
Operating System Your PC’s operating system is preloaded on your PC’s hard disk.
Installation Tools No tools are required to set up your PC. However, if you plan to install a
disk drive or an accessory board in your PC, you will need a flat-blade
screwdriver. For further information about installing accessories, see
chapter 2, How to Install Accessories In Your PC.
Manuals
Mouse
Computer Power Cord
Display Power Cord
Typical
Display
Computer
Keyboard
To Next Page
Loading...
