English 55
4 Troubleshooting Your PC
If Your PC Has a Hardware Problem
4
Troubleshooting
If the Flexible Disk Drive Does Not Work
• Ensure you are using a formatted diskette and it is inserted
correctly.
• Check you are using a diskette that is the right density.
• Check that your flexible disk drive is correctly configured in the
Setup Configuration menu.
• Check the option on the Setup Configuration menu which
enables or disables the on-board flexible disk controller.
• Clean the flexible disk drive using a diskette cleaning kit.
• Check that the flexible disk drive has been enabled in Setup.
• Flexible disk drive
• Boot on flexible disk drive
• Write on flexible disk drives.
• Check that the disk power and data cables are correctly connected.
If the Hard Disk Does Not Work
• Check that the disk power and data cables are correctly connected
(refer to “Connecting IDE Devices”, on page 21).
• Check that the hard disk drive has been “enabled”. There is also an
option in the Setup program that lets you disable or enable boot on
hard disk drive.
• Check that the hard disk drive has been detected.
• Check that the on-board Bus IDE is enabled if you are using the
integrated IDE controller.
To Next Page
Loading...
