2 How to Install Accessories In Your PC
Installing Memory
18 English
2
Installing Accessories
3 For each memory module, slide it into the slot at 45°. Pivot the
memory module to the vertical position and click into place.
4 To add memory modules to memory bank B, first loosen the clips and
tilt forward the memory modules in memory bank A. To add memory
modules to memory bank C, do the same for the memory modules in
both memory banks A and B. Reinstall the memory modules
afterwards.
5 If you need to remove a main memory module, release the retaining
clip and pull the module forward and out of the socket.
6 Install any other accessories before replacing the cover and power
supply. Reconnect all cables and power cords.
7 Check the HP Summary Screen to verify the new configuration.
Refer to “The HP Summary Screen”, on page 42.
C
B
A
C
B
A
C
B
A
To Next Page
Loading...
