To Next Page

To Previous Page

3. Adjust the monitor’s height to a comfortable position for your individual workstation. The

monitor’s top bezel edge should not exceed a height that is parallel to your eye height. A monitor

that is positioned low and reclined may be more comfortable for users with corrective lenses.

The monitor should be repositioned as you adjust your working posture throughout the work day.

NOTE: When the monitor is unfolded for the first time, the display head is locked from

adjusting to a full-height position. To adjust the display head to full height, press down on the

display head to unlock it then pull up on the display head to raise it to the full-height position.

4. You can pivot the monitor from landscape to portrait orientation viewing to adapt to your

application.

a. Adjust the monitor to full height position and tilt the monitor back to full tilt position (1).

b. Pivot the monitor clockwise 90° from landscape to portrait orientation (2).

CAUTION: If the monitor is not in full height and full tilt position when pivoting, the bottom

right corner of the monitor panel will come in contact with the base and potentially cause

damage to the monitor.

If you are adding an optional speaker bar to the monitor, install it after pivoting the monitor.

The speaker bar will come in contact with the base when pivoting and potentially cause

damage to the monitor or speaker bar.

Adjusting the Monitor 11

Questions and Answers:

Need help?

Do you have a question about the HP Z22i and is the answer not in the manual?

HP Z22i Specifications

General