HP Z34c G3

8
Rear components
To identify the components on the rear of the monitor, use this illustration and table.
Table 1-2: Rear components and their descriptions
Component
Description
(1)
OSD control
Activates the OSD buttons so that the button labels
appear on the right side of the screen.
(2)
Security cable slot
Connects an optional security cable.
(3) Power connector Connects the power cord.
(4)
HDMI port
Connects the HDMI cable to a source device such
as a computer.
(5)
DisplayPort connector
Connects a DisplayPort cable to a source device
such as a computer.
(6)
USB Type-C port with
DP Alt Mode 1.4, USB
upstream data, and
maximum power
delivery up to 90 W
Connects the USB Type-C cable to a source device
such as a computer.
Charges most USB Type-C devices even when the
monitor is in sleep mode.
NOTE: The monitor must be set to Performance
Mode.
This port also enables the USB Type-A ports to
perform their functions.
(7)
RJ-45 (network) jack
Connects an RJ-45 Ethernet network cable to the
monitor.
(8)
USB Type-B
port(upstream)
Connects the USB Type-B cable to a source device,
such as a computer, or game console.
NOTE: A USB Type-B cable or a USB Type-C cable
must be connected from the source device to the
monitor to enable USB Type-A ports on the monitor.
(9)
KVM keyboard port
Connects a keyboard to the display.
(9-10)
USB port
Connects a USB cable to a peripheral device, such
as a keyboard, mouse, or USB hard drive.