HP Z34c G3

14
PICTURE 2
.
PICTURE 3
S3
1) Unlock 2 screws and disassemble USB BD from the MF as the picture 1.
2) Tear off the conduct sponge from the MF as the picture 2.
3) Tear off 4 acetate tapes from Panel as the picture 3.
4) Tear off the acetate tape from the camera wire as the picture 4.
5) Unlock 20 screws from the MF as the picture 3.
6) Unlock 6 screws and disassemble the camera from the MF as the picture 4.
PICTURE 1 PICTURE 2