Processor
NOTE: The processor spare part kit includes replacement thermal material.
Description Spare part number
Intel Core i7 processors (include replacement thermal material):
i7-4930MX, 3.00 GHz (Turbo up to 3.90 GHz), 1600 MHz, 8 MB L3 Cache, 8 threads, 57W 735099-002
i7-4900MQ, 2.80 GHz (Turbo up to 3.80 GHz), 1600 MHz, 8 MB L3 Cache, 8 threads, 47W 723523-002
i7-4800MQ, 2.70 GHz (Turbo up to 3.70 GHz), 1600 MHz, 6 MB L3 Cache, 8 threads, 47W 723524-002
i7-4700MQ, 2.40 GHz (Turbo up to 3.40 GHz), 1600 MHz, 6 MB L3 Cache, 8 threads, 47W 723521-002
i7-4600M, 2.90 GHz (Turbo up to 3.60 GHz), 1600 MHz, 4 MB L3 Cache, 4 threads, 37W 737330-002
Intel Core i5 processors (include replacement thermal material):
i5-4330M, 2.80 GHz (Turbo up to 3.50 GHz), 1600 MHz, 3 MB L3 Cache, 4 threads, 37W 738201-002
i5-4300M, 2.60 GHz (Turbo up to 3.30 GHz), 1600 MHz, 3 MB L3 Cache, 4 threads, 37W 738309-002
Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 46)
5. Remove the service door (see
Service door on page 48).
6. Remove the optical drive (see
Optical drive on page 57) or upgrade bay hard drive (see Upgrade
bay hard drive on page 59).
7. Remove the keyboard (see
Keyboard on page 63).
8. Remove the top cover (see
Top cover on page 72).
9. Remove the processor heat sink (see
Processor heat sink on page 95).
Remove the processor:
1. Use a Torx T8 screwdriver to turn the processor locking screw (1) one-half turn counterclockwise,
until you hear a click.
98 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
