Technical white paper Page 24
Verify host names and update if necessary
Assign or re-enter host nicknames and profiles.
1. Log in to SMU Version 3.
2. Click Hosts and then highlight the Host ID.
Figure 19. Highlight Host ID
3. Click Action → Modify Initiator.
Figure 20. Modify Initiator
4. Enter the nickname.
5. ([Optional) Select the host initiators from the same physical host and click Add to Host. (Refer to the SMU Guide for details.)
6. (Optional) Select hosts from the cluster and click Add to Host Group. (See SMU Guide).
To Next Page
Loading...
