Technical white paper Page 25
Re-enter explicit volume mappings
Follow these steps to re-enter explicit volume mapping information:
1. Log in to SMU Version 3.
2. Click Mapping and then click Action → Map.
3. Using the filter and search on each column, locate and select the host group, host, or initiator. Using the filter and searching on each
column, locate and select the volume group or volume. Click the Map button.
Figure 21. Select Host and Volume
4. Select the mode, LUN, and ports. (Ports correspond to the same port on both controllers. For example, 1 = A1 and B1.) Click Apply.
Figure 22. Apply Mappings
To Next Page
Loading...
