1
Scan the QR code on the screen to access online help for the UEFI System Utilities and UEFI Shell.
Default configuration settings are applied to the server at one of the following times:
• Upon the first system power-up
• After defaults have been restored
Default configuration settings are sufficient for typical server operations; however, you can modify
configuration settings as needed. The system prompts you for access to the UEFI System Utilities each
time the system is powered up.
Smart Array MR Gen10 configuration in UEFI System
Utilities
This section contains information about using the Smart Array Configuration utility within the UEFI System
Utilities to manage the HPE Smart Array P824i-p Gen10.
For more information about the options mentioned in this section, see other sections in this guide and
HPE MR Storage Administrator User Guide found at
http://www.hpe.com/info/P824i-p-docs.
Viewing controller information and performing common actions
Use the Dashboard View screen to view the properties of the controller, view the server profile, and
perform common actions.
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10.
2. In the Dashboard View panel, click Main Menu to access the Main Menu.
3. Click Help to view the help content.
4. View the properties.
Setting Definition
Status Status of the controller.
Backplane Number of backplanes connected to this
controller.
Enclosure Number of enclosures connected to this
controller.
Drives Number of drives connected to this controller.
Arrays Number of arrays on this controller.
Logical Drives Number of logical drives on this controller.
Table Continued
36 Configuration
To Next Page
Loading...
