HPE Smart Array P824i-p MR Gen10 User Manual

Energy pack specifications
Table 1: HPE Smart Storage Battery (96W)
Feature Description
Time required to recharge Smart Storage Battery 96 W: 2 hours (For maximum load of 24 devices)
Duration of Smart Storage Battery backup
150 seconds (maximum support)
The Smart Storage Battery provides a sufficient
duration to transfer the cached data from DDR
memory to flash memory, where the data remains
indefinitely or until a controller retrieves the data.
For more information, see the QuickSpecs document for the Smart Storage Battery.
Table 2: HPE Smart Storage Battery (12W)
Feature Description
Time required to recharge Smart Storage Battery 12 W: 1 hour (For maximum load of 3 devices)
Duration of Smart Storage Battery backup
150 seconds (maximum support)
The Smart Storage Battery provides a sufficient
duration to transfer the cached data from DDR
memory to flash memory, where the data remains
indefinitely or until a controller retrieves the data.
For more information, see the QuickSpecs document for the Smart Storage Battery.
Table 3: HPE Smart Storage Hybrid Capacitor
Feature Description
Time required to recharge capacitor pack Not applicable; charge is immediate
Duration of capacitor pack backup
60 seconds
The capacitor pack provides a sufficient duration to
transfer the cached data from DDR memory to
flash memory, where the data remains indefinitely
or until a controller retrieves the data.
The capacitor pack can be used in place of the 96 W Smart Storage Battery, but it is not supported on the
Apollo servers.
For more information, see the QuickSpecs document for the capacitor pack.
Energy pack options 61

HPE Smart Array P824i-p MR Gen10 Specifications

General

Brand	HPE
Model	Smart Array P824i-p MR Gen10
Category	Controller
Language	English