HPE Smart Array P824i-p MR Gen10 - Specifications; Memory and Storage Capacity Conventions; RAID Conventions; Controller Specifications

Specifications
Memory and storage capacity conventions
Memory capacities are specified using binary prefixes:
• KiB = 2
10
bytes
• MiB = 2
20
bytes
• GiB = 2
30
bytes
• TiB = 2
40
bytes
Storage capacities are specified using SI prefixes:
• KB = 10
3
bytes
• MB = 10
6
bytes
• GB = 10
9
bytes
• TB = 10
12
bytes
Older, and other, documentation may use SI prefixes for binary values.
Actual available memory capacity and actual formatted storage capacity for devices are less than
specified values.
RAID conventions
Hewlett Packard Enterprise uses the following naming convention for RAID levels:
• RAID 0
• RAID 1
• RAID 10
• RAID 5
• RAID 50
• RAID 6
• RAID 60
RAID 50 and RAID 60 are also known in the industry as RAID 5+0 and RAID 6+0, respectively.
Controller specifications
For more information about the specifications for the controller, see the quick specs document.
62 Specifications