HPE Smart Array P824i-p MR Gen10 User Manual

The Success screen appears to confirm that the operation completed successfully. For the drive status
change to reflect on the Drive Management screen, refresh the view.
Clearing a configuration
WARNING: Clearing a configuration deletes all of the logical drives and spare drives attached to the
controller.
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Configuration Management > Clear Configuration.
2. In the Warning message screen, click Confirm and Yes to proceed.
The Success screen appears to notify that the operation has been performed successfully.
Controller management
Managing the controller
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Controller Management.
2. In the Controller Management screen, view the basic properties of the controller:
Property Description
Product name The name of the controller
Serial number Controller serial number
Controller status Possible options are Optimal, Needs Attention,
Failed, or Safe Mode
Select Boot Device The selected primary bootable device
PCI ID Manufacturer-assigned ID
PCI Slot Number ID of the PCI Slot that contains the controller
Active package version Active version of the controller package
Backup package version Backup version of the controller package
CPLD version CPLD version
Connector count Number of host data ports/connectors on the
controller
Drive count Number of drives currently attached to this
controller
Logical drive count Number of logical drives on the controller
3. Click Advanced Controller Management to perform advanced controller tasks.
Configuration 43

HPE Smart Array P824i-p MR Gen10 Specifications

General

Brand	HPE
Model	Smart Array P824i-p MR Gen10
Category	Controller
Language	English