HPE Smart Array P824i-p MR Gen10 User Manual

8. Select the Start Immediately option to state the consistency check on all logical drives except any
excluded drives.
9. Click Exclude Logical Drives to specify the logical drives to exclude from the consistency check.
10. Click Apply Changes.
The Success screen appears to confirm that the operation is performed successfully.
Setting factory defaults
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Controller Management.
2. In the Controller Management screen, select Advanced Controller Management.
3. In the Advanced Controller Management screen, select Set Factory Defaults.
The Warning message appears to request confirmation.
4. Click Confirm and Yes.
Configuring advanced controller properties
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Controller Management.
2. In the Controller Management screen, select Advanced Controller Properties .
3. In the Advanced Controller Properties screen, click Cache and Memory to configure the cache and
memory settings.
For more information, see Configuring Cache and Memory settings.
4. Click Patrol Read to configure the Patrol Read settings.
For more information, see Configuring Patrol Read settings.
5. Click Spare to configure the Spare settings.
For more information, see Configuring Patrol Read settings.
6. Click Task Rates to configure the Task Rates settings.
For more information, see Configuring Patrol Read settings.
7. Modify any of the following controller properties:
Property Description
Auto Import Foreign Configuration Enables or disables the automatic import of
foreign configureations without any user
intervention
Table Continued
46 Configuration

HPE Smart Array P824i-p MR Gen10 Specifications

General

Brand	HPE
Model	Smart Array P824i-p MR Gen10
Category	Controller
Language	English