Property or policy Description
Disable Background Intialization (BGI) Disables or enables background initialization.
Selecting No enables background initialization
and allows a new configuration to be initialized in
the background while you use the app to perform
other configuration tasks. This is the default
option. Select Yes if you do not want to allow
background initializations for configurations on
this controller.
Read Cache Policy Specifies the read cache policy for the logical
drive. Possible settings are No Read Ahead and
Read Ahead.
Drive Cache Specifies the drive cache policy for the logical
drive. Possible settings are Unchanged, Enable,
and Disable.
Input/Output Specifies the I/O policy for the logical drive.
Possible settings are Direct and Cached.
Emulation Type Specifies the emulation type policy for the logical
drive. Possible settings are default, Disable, and
Force.
Deleting a logical drive
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Logical Drive Management.
2. In the Logical Drive Management screen, select the logical drive.
3. In the Logical Drive screen, select Delete Logical Drive from the Operation drop-down menu.
4. Click Go.
5. Review warning message, and click Confirm and Yes to proceed.
Initializing a logical drive
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Logical Drive Management.
2. In the Logical Drive Management screen, select the logical drive.
3. In the Logical Drive screen, select Fast Initialization or Slow Initialization from the Operation drop-
down menu.
4. Click Go.
5. Review warning message, and click Confirm and Yes to proceed.
Configuration 51
To Next Page
Loading...
