HPE Smart Array P824i-p MR Gen10 User Manual

Property Description
Data Integrity Capable Whether the drive is capable of protection.
Temperature (C) Temperature of the drive.
Locating a drive
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Drive Management.
2. In the Drive Management screen, select the drive that you want to locate.
3. In the drive screen, select Start Locate or Stop Locate from the Operation drop-down menu.
4. Click Go.
The Success screen appears to confirm that the operation is successful.
The LEDs on the drive starts blinking.
Initializing a drive
NOTE: Initializing a drive will delete any data on the drive.
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Drive Management.
2. In the Drive Management screen, select the drive that you want to initialize.
3. In the drive screen, select Initialize Drive from the Operation drop-down menu.
4. Click Go.
The Success screen appears to confirm that the operation is successful.
5. Review the warning message and click Confirm and Yes to proceed.
Placing a drive offline
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Drive Management.
2. In the Drive Management screen, select the online drive that you want to place offline.
3. In the drive screen, select Place Drive Offline from the Operation drop-down menu.
4. Click Go.
5. Review the warning message and click Confirm and Yes to proceed.
54 Configuration

HPE Smart Array P824i-p MR Gen10 Specifications

General

Brand	HPE
Model	Smart Array P824i-p MR Gen10
Category	Controller
Language	English