HPE StoreFabric SN6600B

HPE B-series 32Gb SAN Switches
Getting Started Guide
Part Number: 870876-002
Published: March 2017
Edition: 2
Abstract
This document provides information on installing, configuring, and maintaining the HPE
StoreFabric SN3600B 32Gb Fibre Channel Switch or HPE StoreFabric SN6600B 32Gb Fibre
Channel Switch.

HPE StoreFabric SN6600B Specifications

General

Brand	HPE
Model	StoreFabric SN6600B
Category	Switch
Language	English

Summary

Setup and Install Procedures

Installation and Safety Considerations

Guidelines and precautions for installing the switch safely.

SN3600 B Rack Mount Installation

Procedure for installing the SN3600B switch in a rack using the mount kit.

SN6600 B Rack Mount Installation

Procedure for installing the SN6600B switch in a rack using the mount kit.

Standalone Switch Installation

Steps for installing the switch as a standalone unit on a flat surface.

Login and Configuration Steps

Initial Setup and Console Access

Prerequisites, serial connection, and logging into the switch console.

Setting the IP address

Configuring the switch's IP address using DHCP or static assignment.

Installing Transceivers

Procedure for installing SFP+ or QSFP transceivers into switch ports.

Operating Modes and Configuration

Switch Power and LED Status

Instructions for powering the switch on/off and understanding LED status indicators.

Switch Specifications

ESD and Grounding Recommendations

ESD Precautions

Grounding Methods