If the optional PCIe cards were ordered with the system, they have been preinstalled. If the cards
were ordered separately, install them now.
Figure 1: PCI slot numbering
a. Install network cards starting in PCI slot 1 and then additional network cards in slots 2, 4, and 5 in
that order.
b. Install FC cards starting at PCI slot 5 and then additional FC cards in slots 4, 2, and 1 in that
order.
c. Verify that the correct SFP+ transceivers are fitted, if necessary.
For detailed installation instructions, see Install PCIe cards .
4. Install the server in the rack.
a. Install the rail kit for the StoreOnce server.
See the installation instructions that are provided with the rail kit.
b. Insert the two locking nuts for the server into the rack; one on each front column.
c. Install the server into the rack and secure it using the thumbscrews on the front bezel of the
server.
5. Attach the security bezel to the front of the server.
a. Insert the security bezel right tab into the slot on the chassis and then rotate the bezel to close.
b. Lock the bezel.
10 HPE StoreOnce 3620 System
To Next Page
Loading...
