HPE StoreOnce 5200

HPE StoreOnce 3620 System
HPE StoreOnce 3620 System
Base system
The HPE StoreOnce 3620 base system consists of a server with preconfigured storage on six hard disks
of 4 TB each.
Capacity upgrade options
BB960A: HPE StoreOnce 3620 24 TB Capacity Upgrade Kit
Six 4 TB preconfigured disks to add to the server for a maximum configuration of 12 hard disks in the
system.
Optional hardware
Four PCIe slots are available for optional hardware.
• BB984A: StoreOnce 10GbE-T 2-port Ethernet card
• BB982A: StoreOnce 10/25Gb SFP 2-port Ethernet card
• BB986A: StoreOnce 16Gb Fibre Channel 2-port card
• BB990A: StoreOnce 32 Gb Fibre Channel 2-port card
HPE StoreOnce 3620 System installation process overview
Procedure
1. Prepare the rack.
2. Verify system handling requirements.
3. Install the StoreOnce 3620 System.
4. Configure the newly installed system.
Preparing the rack for the StoreOnce 3620 System
Procedure
1. Ensure that the rack has sufficient space for the system.
• The base system requires 2U.
• The system does not support capacity upgrade enclosures.
2. Install two power cords for the server.
8 HPE StoreOnce 3620 System