HPE StoreOnce 5200

1
2
1
2
3
4
5
8
9
10
11
12
15
16
17
18
19
22
23
24
25
26
29
30
31
32
33
6
7
3
4
5
13
14
10
11
12
20
21
17
18
19
27
28
24
25
26
34
35
31
32
33
6
7
13
14
20
21
27
28
34
35
1
2
8
9
15
16
22
23
29
30
Item Description
1 Drawer 1 containing eleven storage disks (bays 23-33) and two hot spare disks (bays 34 and 35)
2 Drawer 2 containing two hot spare disks (bays 34 and 35)
Distributing the drives correctly
The disks in the capacity upgrade kits must be added to the storage enclosures in a specific order. Each
drawer has a label that specifies the sequence in which each set of 11 disks must be installed. This
sequence is mandatory for the product to function because the StoreOnce software expects the storage
to be populated in this way.
Table 1: Populating disk bays with capacity upgrade disk packs in an enclosure
Upgrade
disk pack
Drawer 1 (on left as seen from the front) Drawer 2 (on right as seen from the
front)
Base Comes with 2 spare hot disks in bays 34-35,
and 11 preconfigured disks in bays 23-33.
Comes with 2 spare hot disks in bays
34-35.
1 Add 11 preconfigured disks to bays 23-33.
2 Add 11 preconfigured disks to bays 12-22.
3 Add 11 preconfigured disks to bays 12-22.
4 Add 11 preconfigured disks to bays 1-11.
5 Add 11 preconfigured disks to bays 1-11.
102 Installing capacity upgrade kits