h. Insert the eight locking nuts for the storage enclosure into the rack; two on each column.
To locate the position for the locking nuts, count up 4U from the bottom of the rails (1). Place a nut
on either side of the +4U position on each rack column (2).
2. Holding the handles (1), lift the enclosure onto the rack and push it into position (2). Tighten the
thumbscrews (3) to secure the enclosure to the rack.
WARNING: Always use at least two people to lift an enclosure into the rack. If the enclosure is
being loaded into the rack above chest level, a third person must assist with aligning the
enclosure with the rails while the other two people support the weight of the enclosure.
112 Installing capacity upgrade kits
To Next Page
Loading...
