• To add a user or group, select Add user or group on the Actions menu.
• To edit a user, click the user name.
• To remove a user, click the user name and then click Remove.
For additional information, see User roles and types.
5. Configure StoreOnce email alerts.
To display the configured email alerts, select Notifications from the Settings menu item
6. Configure SNMP.
a. On the main menu, select Settings.
b. In the Notifications section, click the SNMP panel.
• To view summaries of the SNMP configuration, click the Overview tab. To view lists of the
items in the summaries, click the graphic segments and legends.
• To configure SNMP, select the tabs for Agent Setup, Trapsinks, and Users.
7. Apply an SSL certificate.
a. On the main menu, select Settings.
b. In the Security section, click the Certificates panel.
c. On the Certificates screen, select Generate CSR on the Actions menu.
8. Expand storage if necessary.
Expand storage in the following cases:
• Additional capacity upgrade kits were attached after running the First Run Setup Wizard.
• All licenses were not applied when capacity upgrade kits were installed. In this case, add the
correct licenses and expand storage.
9. Configure Remote Support using STaTS.
For additional information, see StoreOnce Remote Support.
10. Configure Fibre Channel.
For additional information, see Fibre Channel with StoreOnce Systems.
11. Configure iLO, if necessary.
If you plan to use iLO with the system and did not configure it during the system installation,
configure iLO now.
• View or update the iLO configuration from the StoreOnce Management Console.
a. On the main menu, select Settings.
b. In the Hardware section, click the Integrated Lights Out (iLO) Configuration panel.
Configuring a newly installed system 123
To Next Page
Loading...
