NOTE: The 10GbE-T Network card does not require SFP+ transceivers.
b. Fibre Channel card: use the supplied 16 Gb SFP+ transceivers (Part Number: E7Y09-63001) or the
supplied 32 Gb SFP+ transceivers (Part Number: P9H30-63001), as appropriate.
2. Connect the server to the 10/25GbE network and/or Fibre Channel SAN, as appropriate. Cables are
not supplied and must be purchased separately. Refer to the HPE StoreOnce Systems QuickSpecs for
the recommended cables for each interface.
3. Power on the StoreOnce System manually, or by using the iLO interface.
4. To view the status of optional hardware and license it for use, use the StoreOnce Management
Console, described in Complete new hardware installation using the StoreOnce Management
Console.
Installing optional hardware 139
To Next Page
Loading...
