a. Press F9 System Utilities.
b. Navigate to System Configuration > iLO 5 Configuration > Network Options.
c. Configure the iLO network options and note the details.
iLO IP address:___________________________
iLO subnet mask:_________________________
iLO gateway:_____________________________
15. Configure the basic network.
By default, the system will have already attempted to obtain a DHCP address on LAN port 1. If you
already know the IP address that was assigned over DHCP, this step is optional.
a. Log in using the default user name and password.
Default user name: console
Default password: changeme
b. Change the console password to proceed.
Choose a secure password with at least eight characters that is memorable to you.
c. To configure a static address for LAN port 1 (eno1), select the Configure initial network
option from the console menu.
Note the DHCP assigned IP address or the static address details.
IP address:______________________________
Prefix length:_____________________________
Gateway:________________________________
DNS:________________________________
You can remove the console display and keyboard.
16. Open a web browser and use the IP address from the previous step to access the StoreOnce
system. The First Time Setup wizard is automatically displayed. Use the First Time Setup wizard to
configure the system for use.
The setup steps include:
• Setting the Administrator Password.
• Setting the Console Password.
• Setting basic System Information such as the system name (host name), location, and contact
information.
• Setting the System Date & Time. You can set the date and time manually, or synchronize the
date and time with a network time server.
• Configuring Storage. The wizard detects the factory installed storage. The wizard also enables
you to configure additional storage capacity that you might have installed. The wizard also reports
HPE StoreOnce 5250 and 5650 Systems 67
To Next Page
Loading...
