HPE StoreOnce 5200

1
2
3
Figure 26: Cabling the first capacity upgrade kit (JBOD 1)
Item Description
1 Server node.
2 JBOD 1: First capacity upgrade kit.
Item SAS cable Label color Cable from To
3 New 0.5 m cable Red Node Slot 6 Port 1 JBOD 1 IOM 1 Port 1
4. If you are finished adding capacity upgrade kits, skip to Adding power cables.
Cabling the second capacity upgrade kit (JBOD 2) (StoreOnce 3640)
Procedure
1. Apply the "JBOD2" label to the top-left pull-out tab at the rear of the enclosure.
2. Label the cable that connects the second capacity upgrade kit to the system.
SAS cable Label color New label
New 0.5 m SAS cable Red J1:I1:P2 - J2:I1:P1
3. Cable the enclosure as shown.
1
2
3
4
Figure 27: Cabling the second capacity upgrade kit (JBOD 2)
82 Installing capacity upgrade kits