MT800 User Manual
2. Rotate the ribbon rewind wheels of both left top and lower right (or right top and lower left)
towards the center simultaneously to make it smooth.
3. Press down the cover by hands until it clicks into place.
3.3 Loading Paper
1. Make sure the ribbon is properly loaded, hold down the power button for a few seconds, and
then release it when the printer is turned on.
2. Put the paper into the paper inlet in parallel. Printer will feed a distance automatically after it
detects the paper. If the buzzer sounds once after paper feeding is stopped, it shows that the
paper is loaded successfully and the printer is ready.
To Next Page
Loading...
Need help?
General
