HPRT TP806 User Manual

TP801/TP805/TP806 User Manual
www.hprt.com 44
6 Troubleshooting
Your printer is very reliable, but occasionally problems may occur. This chapter
provides information on some common problems you may encounter and how to
solve them. If you encounter problems that you can not resolve, contact your dealer
for assistance
6.1 Printer not working
Problem description
Probable reason
Solution
LED indicator not light, printer not
working
Printer No power
Connecting the power supply
Printer not on
Turn on the printer
Circuit board broken
Contact with the dealer
6.2 LED indicator on the control panel and beeper alarm
Problem description
Probable reason
Solution
Paper LED always on
Paper near end
The roll paper is near end, the printer can
work normally
Error LED always on and beeper alarms
Printer Cover open
Close the printer cover
Paper Error LED always on and beeper alarms
Paper end
Reload the roll paper
Error LED blinks and beeper alarms
Thermal print head overheated
Turn the printer off and resume when it cools
overvoltage
Print with specified voltage
Low-voltage
Print with specified voltage
6.3 Troubles occur during printing
Problem description
Probable reason
Solution
Coloured stripe in the paper
Paper near end
Reinstall the roll paper
Blurred printing or spot
Incorrect roll paper installation
Check if the roll paper is installed
Unqualified roll paper
Use recommended thermal roll paper
Dirty thermal head or print rooler
Clean the thermal head or print rooler
Low print density
Increase the print density level
Paper Jam
Paper stucked
Open the printer cover, check the paper
path and remove jammed paper
Vertical print words missing
Dirty thermal head or print rooler
Clean the thermal head or print rooler
Thermal head damaged
Contact your dealer for assistance

HPRT TP806 Specifications

General

Brand	HPRT
Model	TP806
Category	Printer
Language	English