HPRT TP806 User Manual

TP801/TP805/TP806 User Manual
www.hprt.com 45
6.4 Problems emerge during the paper cutting processes
Problem description
Probable reason
Resolution
Cutter jam, the movable
cutter cannot back
Cutter abrasion, insufficient
cutting
replace the cutter
Worm gear and worm wheel
abrasion
Replace the worm gear and worm wheel
Motor burnt
Replace the motor
Paper scraps
Clean the paper scraps on the transmission system
Insufficient cutting
Cutter edge abrasion, paper
too thick
Replace the cutter
Paper jam
Thermal printer head over
heat
Reduce the thermal printer head heating power
Driving too fast
Reduce the printer speed to the limit of thermal printer head
Wrong paper feeding
position
Put the paper parallel with the paper mount and insert into the
space between platen roller and the thermal printer head
6.5 Removing Jammed Paper
 Do not touch the thermal print head because it becomes very hot after printing.
 Turn the printer off and press the cover open button.
 Remove jammed paper, reinstall the roll, and close the cover.

HPRT TP806 Specifications

General

Brand	HPRT
Model	TP806
Category	Printer
Language	English