49
Special tools
Special tools may be required to perform some repairs.
• Extractor for dismantling ball bearings
• Hydraulic press for mounting
• Belt tensioning tool HTC 500 (ej hub) article: 110232
• Belt tensioning tool HTC 650 (three grinding holders) article: 110231
• Belt tensioning tool HTC 800 (models built before year 2000) article: 110230
• Belt tensioning tool HTC 800 (models built after year 2000) article: 110634
• Special tool hammer 500 article: 110212
To move the motor plate out of the centre position.
• Special tool hammer 650 and 800 (models built before year 2000) article: 110213
To move the motor plate out of the centre position.
• Locating pin M6x70 article: 310050
To assist in closing the can
To Next Page
Loading...
