13
Function Description of Machine Components
1. Electrical cabinet:
Contains electronics for the grinding head.
2. Hour counter:
Shows how long the machine has been in service.
3. Connection, extractor:
Connect a sufciently large external dust extractor for
collecting grinding dust when dry grinding.
4. Motor:
The motor runs the grinding disks under the grinding
heads.
5. 32A Connection, elec:
Connect the mains electricity to this contact. See machi-
ne plate for the correct connection.
6. Control panel:
The machine’s control panel includes controls and swit-
ches for operating the oor grinders. Lamps here indi-
cate the status of the grinder.
See Pages 14-15 for a detailed description.
7. Handle:
The handle can be set in different positions according to
preference.
8. Handle locking:
Spring-loaded locks on both the top and bottom of the
handle.
9. Water tank:
Fill up water here when wet grinding.
10. Weight:
The weights can be lowered in three different positions.
See Page 17.
11. Weight lock:
Use to lock the weight in a specic position.
12. Splash guard:
The splash guard prevents grinding dust from spreading
outside of the machine’s working area.
13. Grinding cover:
Protective cover from the grinding head with grinding
tools.
To Next Page
Loading...
