HTC 650 HDX - Warranty; The Manual

6
Warranty
The warranty only covers manufacturing faults. HTC is not responsible for any damage arising from, or caused by, trans-
port, unpacking or usage. In no case, and under no circumstances will the manufacturer be held responsible for damage or
faults caused by incorrect application, corrosion or due to usage that does not comply with the specications. The manufac-
turer is in no way liable for indirect damages or costs. The manufacturer warranty period is 12 months from commissioning,
although not longer than 18 months from delivery from the factory. See separate warranty terms.
Local distributors may have special warranty conditions that are stated in their terms of sale, terms of delivery and warranty
conditions. In the event of any uncertainty pertaining to the warranty conditions, please contact your distributor.
The manual
In addition to general functionality, this manual also covers the applications and maintenance of the HTC 650 EX/HDX
grinder. A number of symbols have been used to clearly mark the sections that are of extra importance in the manual, see
below. In order to avoid personal injury and material damage, as far as possible, it is of the utmost importance that you ca-
refully read and fully understand the texts that accompany these symbols. There are also some practical tips marked with a
symbol. The tips are there to help you use the machine and to get the best possible benets from the grinder.
This symbol means Warning! and means risk of personal injury or material damage if the machine and accompanying equipment is used
incorrectly.
If you see this symbol next to a text, read the text extra carefully and do not perform any operation you are unsure of. This is for your own
or for other users’ safety and to avoid damaging the machine or any other equipment.
This symbol means Note! and means risk of possible material damage if the machine and accompanying equipment is used
incorrectly.
If you see this symbol next to a text, read the text extra carefully and do not perform any operation you are unsure of. This is to avoid
damaging the machine or any other equipment.
This symbol means Tips! and means that you will given tips and advice on facilatory or wear-saving measures for your machine or
accompanying equipment.
If you see this symbol next to a text, you should read through the text as it will assist you in your work and extend the service life of the
machine.