23
Maintenance
Cleaning the machine
Always clean the machine after use.
Do not use a pressure washer as this can force water
into various components causing damage.
We recommend the regular inspection of seals, especi-
ally the seal by the upper belt. See Page 41. This seal
should be inspected once every three months and chan-
ged if worn.
Spare parts and service
Any repairs that may be necessary are to be performed
by a HTC Service Center, which has trained service per-
sonnel in HTC 650 and who use HTC original parts and
accessories.
Please contact your HTC 650 distributor if you need
spare parts or service.
Always state model and serial number if you have any
questions about your machine.
Environment
The majority of components in HTC machines are made
of recyclable metals or plastics. The HTC 650 is fully
dismountable. Plastic parts manufactured of ABS plastic
can be reused by sorting as hard plastic. The electronics
are sorted as electronic waste. Other metals are alumi-
num and steel. The machine or machine components
can of course be returned to HTC Sweden AB for recyc-
ling.
To Next Page
Loading...
