HTC 800 RX - Radio Control Advanced Features and Troubleshooting

HTC 800 RX Usage
2.0 23
4.7.1 Fitting grinding tools
1. Slide the grinding tool diagonally, from above, down into the appropriate guide
slot on the tool holder, seeFigure4-12, page23. Then push the tool fully into
the guide slot.
Figure 4-12. Fitting grinding tools
2. Lock the grinding tool into the tool holder by giving it a few light taps with a
rubber hammer - see Figure4-13, page23.
Figure 4-13. Locking grinding tools