HTC 800 RX - Page 7

HTC 800 RX Table of contents
iii
6 Troubleshooting 35
6.1 General Information ......................................................... 35
6.2 The machine will not start ................................................ 35
6.3 The machine vibrates or wears the tool unevenly ........... 35
6.4 The machine is grinding at an angle ............................... 35
6.5 The machine stops - manual operation ........................... 35
6.6 The machine stops - radio control ................................... 35
6.7 The fuses trip frequently .................................................. 36
6.8 The machine cannot cope ............................................... 36
7 Electronic error codes 37
7.1 General Information ......................................................... 37
7.2 Schneider Electric ATV312 .............................................. 37
7.2.1 Resetting the frequency converter ..................... 38
7.2.2 Checking the last error code .............................. 38
8 Technical data 39
9 Environment 42
10 Warranty and CE marking 43
10.1 Warranty .......................................................................... 43
10.2 CE marking ...................................................................... 43