Using Quick Settings
The Quick Settings tab lets you easily turn on Wi-Fi, Bluetooth, GPS, and more, and
also provides a quick shortcut to all HTC Wildfire S settings.
1. Press and hold the status bar, then slide your finger downward to open the
Notifications panel.
2. Tap the Quick Settings tab.
3. Tap the check box next to an item to turn it off or on.
Closing the Notifications panel
Press and hold the bottom bar of the Notifications panel, then slide your finger up the
screen. Or just press .
Connecting HTC Wildfire S to a computer
Whenever you connect HTC Wildfire S to a computer using the USB cable, the
Connect to PC screen opens and lets you choose the type of USB connection.
Select one of the following choices, and then tap Done:
Charge only Select this option if you only want to charge the battery while
connected to your computer.
HTC Sync Select this option to synchronize contacts, calendar, and other
information between your computer and HTC Wildfire S.
Disk drive This mode is available only when there’s a storage card installed on
HTC Wildfire S. Select this mode when you want to copy files
between the storage card and your computer.
When Disk drive mode is enabled while HTC Wildfire S is connected
to the computer, you will not be able to use apps on HTC Wildfire S to
access the storage card.
25 Basics
Connecting HTC Wildfire S to a computer
Only
Connecting HTC Wildfire S to a computer
Whenever you connect HTC Wildfire S to a computer using the USB cable, the
Only
Whenever you connect HTC Wildfire S to a computer using the USB cable, the
Connect to PC screen opens and lets you choose the type of USB connection.
Only
Connect to PC screen opens and lets you choose the type of USB connection.
Select one of the following choices, and then tap
Only
Select one of the following choices, and then tap
Closing the Notifications panel
for
Closing the Notifications panel
Press and hold the bottom bar of the Notifications panel, then slide your finger up the
for
Press and hold the bottom bar of the Notifications panel, then slide your finger up the
screen. Or just press
for
screen. Or just press
Connecting HTC Wildfire S to a computer
for
Connecting HTC Wildfire S to a computer
Press and hold the status bar, then slide your finger downward to open the
certification
Press and hold the status bar, then slide your finger downward to open the
Tap the check box next to an item to turn it off or on.
certification
Tap the check box next to an item to turn it off or on.
Closing the Notifications panel
certification
Closing the Notifications panel
Connecting HTC Wildfire S to a computer
2011/03/07
Connecting HTC Wildfire S to a computer
Whenever you connect HTC Wildfire S to a computer using the USB cable, the
2011/03/07
Whenever you connect HTC Wildfire S to a computer using the USB cable, the
Connect to PC screen opens and lets you choose the type of USB connection.
2011/03/07
Connect to PC screen opens and lets you choose the type of USB connection.
Select one of the following choices, and then tap
2011/03/07
Select one of the following choices, and then tap
Select this option if you only want to charge the battery while
2011/03/07
Select this option if you only want to charge the battery while
connected to your computer.
2011/03/07
connected to your computer.
Select this option to synchronize contacts, calendar, and other
2011/03/07
Select this option to synchronize contacts, calendar, and other
information between your computer and HTC Wildfire S.
2011/03/07
information between your computer and HTC Wildfire S.
Disk drive
2011/03/07
Disk drive
This mode is available only when there’s a storage card installed on
2011/03/07
This mode is available only when there’s a storage card installed on
HTC Wildfire S. Select this mode when you want to copy files
2011/03/07
HTC Wildfire S. Select this mode when you want to copy files
between the storage card and your computer.
2011/03/07
between the storage card and your computer.
To Next Page
Loading...
