40 | Manual
THE PROFESSIONAL HUMIDITY SWITCH PLS 1000 can measure the
relative humidity and the temperature in two different locations with the help of
two humidity sensors TH-1. The PLS 1000 uses these values to determine the
absolute humidity and the respective dew points. Based on these values and
5 different functions (modes), humidity and temperature switching points can
be set. Fans for incoming air and exhaust air can be controlled directly through
4 integrated potential-free relays. Typical applications are the measurement of
humidity and temperature, automatic ventilation, the drying or humidifying of
rooms, manual control of room fans and the setup of a 2-channel temperature
and humidity switch.
CHARACTERISTICS
– 5 selectable functions (measuring, cellar drying, dT-ventilation, TF-switch,
manual control)
– Remote measurement possible up to 50 meters
– Sensor monitoring for interruption of the sensor line
– Automatic humidity control of bathrooms, sanitary rooms, cellars,
wine cellars, kitchens, etc.
– Direct control of room fans and other consumers via 4 potential-free relays
– Regulation of the room climate
– Dimensions device: 170 x 140 x 68 mm
– Dimensions sensor: 67 x 37 x 22 mm
PROFESSIONAL HUMIDITY
SWITCH PLS1000
Art.- No. 1114630
GB
To Next Page
Loading...
