Huawei CX320 - Page 31

Label Meaning Color Description
HLY Health indicator Red and
green
l Off: The CX320 is not
powered on.
l Steady green: The CX320
is operating properly or has
minor alarms.
l Blinking red (1 Hz): A
major alarm is generated.
l Blinking red (4 Hz): A
critical alarm is generated.
l Blinking red (5 Hz): The
CX320 is not securely
installed.
NOTE
It is difficult to identify the
difference between blinking
frequencies of 4 Hz and 5 Hz. If
the indicator is blinking red
quickly, check whether the
device has been installed
properly and then check whether
a critical alarm has been
generated.
and
Connection
status indicator
for the 10GE
optical port
Green
l Off: The port is not
properly connected.
l Steady green: The port is
properly connected.
and
Data
transmission
status indicator
for the 10GE
optical port
Orange
l Off: No data is being
transmitted over the port.
l Blinking orange: Data is
being sent or received over
the port.
and
40GE optical
port indicator
Green
l Off: No data is being
transmitted over or the port
is not connected.
l Blinking green: Data is
being sent or received over
the port.
l Steady green: The port is
properly connected.
CX320 Switch Module
User Guide
2 Product Overview
Issue 09 (2019-08-02) Copyright © Huawei Technologies Co., Ltd. 25