Huawei CX320 - Logging in to a Device over a Serial Port by Using Putty

Figure 6-2 PuTTY Configuration
Step 9 Click Open.
The following information is displayed:
login as:
NOTE
l If this is your first login to the server, the PuTTY Security Alert dialog box is displayed. Click Yes
to proceed.
l If an incorrect user name or password is entered, you must set up a new PuTTY session.
Step 10 Enter the user name and password.
If the login is successful, the server host name is displayed on the left of the prompt.
----End
6.3 Logging In to a Device Over a Serial Port by Using
PuTTY
Scenarios
Log in to a compute node, switch module, or management module in an E9000 chassis over a
serial port by using PuTTY when:
CX320 Switch Module
User Guide
6 Common Operations
Issue 09 (2019-08-02) Copyright © Huawei Technologies Co., Ltd. 87