NOTE
Set Host Name and Saved Sessions, and click Save. You can double-click the saved record in Saved
Sessions to log in to the MM910 the next time.
Step 6 In the navigation tree, choose Session.
Step 7 Select SSH for Connection type, as shown in Figure 6-1.
Figure 6-1 PuTTY Configuration
Step 8 (Optional) Choose Terminal > Keyboard, and select Control-H under The Backspace key,
as shown in Figure 6-2.
This setting can solve the problem that the characters on the CLI cannot be deleted by using
the Backspace key.
CX320 Switch Module
User Guide
6 Common Operations
Issue 09 (2019-08-02) Copyright © Huawei Technologies Co., Ltd. 86
To Next Page
Loading...
