[~HUAWEI-aaa] display aaa local-user
Type: F - Ftp, T - Telnet, M - Terminal, S - Ssh, N - Snap, X - Dotlx
-----------------------------------------------------------------------
Username State Type Access-limit Online Admin-level User-group-id
-----------------------------------------------------------------------
root Active S -- 0 3 --
user123 Active S -- 0 2 --
-----------------------------------------------------------------------
[~HUAWEI-aaa]
Step 9 Exit the AAA view.
[~HUAWEI-aaa] quit
Step 10 Quit the system view.
[~HUAWEI] quit
Step 11 Run the save command and enter y as prompted to save configuration data.
<HUAWEI> save
----End
4.8 Configuring Switching Service Data
Configure the CX320 feature data after the converged switching plane meets the basic
configuration conditions.
Feature configuration for the converged switching plane is as follows. For details, see CX320
Switch Module V100R001C10 Configuration Guide.
Table 4-9 List of configurable features
Configuration Type
Configuration Item
Basic Configuration
l ZTP Configuration
l Logging In to the System for the First Time
l Configuring a User Interface
l Configuring User Login
l File Management
l Configuring System Startup
l Centralized Management for Configuration Files
l BIOS Menu
Virtualization
Configuration
Stack Configuration
CX320 Switch Module
User Guide
4 Configuring the CX320
Issue 09 (2019-08-02) Copyright © Huawei Technologies Co., Ltd. 71
To Next Page
Loading...
Need help?
General
