Huawei CX320 - 4 Configuring the CX320

4 Configuring the CX320
This topic describes the initial configuration process for the installed CX320 on a local PC to
implement the switching function.
4.1 Configuration Overview
4.2 Default Information
4.3 Setting an IP Address for the Management Network Port
Set the IP address for the converged switching plane management network port on the
CX320.
4.4 Logging In to the CLI of Each Switching Plane
4.5 Checking the Switching Plane
4.6 Changing Initial User Passwords
4.7 Adding a User
4.8 Configuring Switching Service Data
Configure the CX320 feature data after the converged switching plane meets the basic
configuration conditions.
4.9 Backing Up the Configuration File
This topic describes how to back up the configuration file. If configuration errors occur or the
CX320 is faulty, you can use the backup configuration file to restore configuration data.
CX320 Switch Module
User Guide
4 Configuring the CX320
Issue 09 (2019-08-02) Copyright © Huawei Technologies Co., Ltd. 52