Figure 2-12 Mapping between the CX320 and mezzanine cards on compute nodes
The following describes the mapping between the CX320 switch modules and mezzanine
cards, assuming that the CX320 switch modules are installed in slots 2X and 3X and connect
to Mezz 1.
Mapping Between Switch Modules and Mezzanine Card Ports
Mapping between CX320 switch modules and ports on the MZ510
The MZ510 provides two 10GE ports (ports 1 and 2), which connect to the 10GE switching
planes of the CX320 switch modules in slots 2X and 3X respectively, as shown in Figure
2-13.
CX320 Switch Module
User Guide
2 Product Overview
Issue 09 (2019-08-02) Copyright © Huawei Technologies Co., Ltd. 30
To Next Page
Loading...
