l planenum: indicates the numbers of the switching planes. The value of the converged
switching plane is 1.
l filename: indicates the name of the configuration file to be loaded.
The following information is displayed:
In this condition,if offline configuration success,the blade will
reboot.
Do you want to continue?[Y/
N]:y
Success
The MM910 restarts automatically after the configuration file is successfully loaded to
the converged switching plane, and the configuration file is automatically restored after
the restart.
----End
CX320 Switch Module
User Guide
5 Restoring the Configuration File
Issue 09 (2019-08-02) Copyright © Huawei Technologies Co., Ltd. 81
To Next Page
Loading...
