Sign language
Sign language is available on some On Demand
programmes on YouView. If a programme has
been produced with sign language and this
setting has been enabled, signed versions of a
programme will be played in preference to non-
signed versions.
To turn sign language on:
1. Go to Settings and select Subtitles and
Accessibility and press OK.
2. Scroll up the list of options and choose Sign
Language.
3. Use the left or right arrow to select ON and
press OK.
‘Zooming’ the screen
If you’re finding it difficult to read some of the
text on the YouView screens, you can use the
Zoom tool to enlarge it.
Simply press on the remote control when
using the YouView menus and guides, and use the
left, right, up or down arrow keys to move around
the screen. Once you’ve finished reading, press
Zoom again to go back to normal view.
Please note: Other keys such as OK do not work
when zoomed.
Settings: Subtitles and Accessibility
Settings: System Information
Device information
This option tells you the manufacturer, model
and serial number of your box.
Software version
This option tells you which versions of software
you currently have installed. This will change from
time to time as YouView updates software on
your behalf.
Number of channels
This tells you how many channels you have
tuned. Check here if you think you have missing
channels.
TV signal quality
If you’re having reception problems, you can
check the quality and strength of the channel
you’re watching. In Settings, use the arrow key
to scroll left to the TV Signal and Quality option,
then press OK.
Network connection status
If you are using a broadband router, this setting
will show you the status of your connection.
It will also give you information about that
connection, such as the IP address. You can
change this information in Network and Internet
settings.
19
To Next Page
Loading...